Are you planning to spark your old house with unique decor ideas, decorating with wallpapers may be a great choice. However, intsalling wallpaper can be daunting for first-timer, and you need to be more cautious to avoid messing up. If you lack adequate skills, the guide below will provide excellent DIY tips for hanging wallpapers. Let’s get started!
1. Assess your wall surface
It’s always important to check the condition of your wall before hanging new mural wallpaper. If there were any old wallpapers, you must ensure a smooth and even surface for the new wallpaper to adhere to. Using a stripping knife or wallpaper stripper can make the process easier and more efficient.
Once you’ve removed the old wallpaper, inspect the surface for imperfections, such as holes or bumps. Filling in gaps with filler and allowing it to dry before proceeding can help ensure a flawless finish for the new wallpaper.
2. Make measurements and cut
Measure the wall’s height, width, and length of the wallpaper strips you intend to use using a tape measure. If you are decorating your kid’s room, you must ensure accuracy.
If you extend your measurements, your kids can easily peel the paperwork. Therefore determine the widths and lengths you will use without overlapping strips. You can trim your nursery wallpaper to the appropriate dimensions based on your measurements.
3. Apply paste and stick
Apply adhesive to the wall, then position the wallpaper, ensuring the creased edge is tucked neatly into the corner. Smooth the wallpaper with your smoothing brush or spatula, then trim any excess using scissors or a craft knife.
Once you have finished applying the wallpaper, wipe away any excess adhesive with a damp cloth and leave the wallpaper to dry for a few hours before placing your World Map Wall Mural or any other type you’ve selected.
4. Smooth on the wall
When hanging wallpaper, it is essential to gently apply each strip or width of paper to the wall to ensure that it is aligned correctly and to avoid any wrinkles or creases. Once the piece is in place, you can use a wallpaper hanging brush or smoothing tool to gently press the paper onto the wall and remove any air bubbles or imperfections.
However, you must note that different wallpaper types may require extra hanging and smoothing techniques. Some wallpapers, such as forest wallpaper or textured papers, may require more pressure to be applied during the hanging and smoothing process.
5. Cut and repeat
Smooth your paper to the edges, then trim as necessary. Before peeling back the wallpaper and making cuts, you can draw a straight line with a pencil for accuracy. Remove any extra paste and throw away any additional wallpaper trims. Repeat these procedures to apply the next wallpaper section when you have covered the entire surface.
Decorating with wallpapers is a cost-friendly way to improve your home’s appeal. However, if this is your first time trying it, you need the tips and hacks to do it as a pro. Above are essential DIY Beginners tips to guide you.